Adventure Mirror XL RAM Arm 6in/150mm Ball Stud Base 10mm x 1.25mm Thread 5.5" Wide - Best FOV Perfect on bikes like BMW GS(M10x1.5 Adaptor Required), KTM LC8, Honda Africa Twin, KLR Most Stable
Threaded Base for 10mm x 1.25 thread pitch. Compatible with all Honda, Kawasaki, KTM, Triumph, Husqvarna, Zero and Suzuki bikes, and left side of Yamaha. This is for one single ball
Enduro Mirror L RAM Arm 3in/76mm Ball Stud Base 10mm x 1.25mm Thread Perfect on bikes like BMW GS (M10x1.5 Adaptor Required), KTM LC8, Honda Africa Twin, KLR, Enduro Most Stable
Ball Stud Base & Adapter with 10mm x 1.5 threads Fits F650/800 twins and R1200GS and allows RAM arms and Double Take Mirrors to be installed on BMW's This is for one ball stud base assembly as shown
Mirror mount split clamp assembly, 10mm x 1.25. Adapts a standard ball stud base onto any 7/8ths or any oversize 1 1/8ths handlebar. Can be used on any dirt bike, or any street bike to create or replace a mirror perch.
This is the wide ration transmission for the KTM and Husqvarna LC4 engine and is available for all variants 2007-2021. Please read the full specification in the detailed item description.
The XL Arm works with the Doubletake Adventure to provide great visibility but can also be used with others if preferred. 6 Inches / 150mm in length This is for one arm only
Right hand mirrors on Yamahas, certain Betas, and certain KTM bikes may require a reverse thread adapter. Some models (WR250s) are factory equipped with a reverse thread adapter. Please verify if your specific bike is equipped with the reverse thread adapter on the right side before ordering This is for one adaptor only
Aluminium extension with 10mm x 1.25 male and female threads Works with standard Ball Stud Base to offer clearance in some applications where you need to raise the ball for example to clear throttle cables This is for one extension only
Please contact me to discuss specifications. Please note: You must confirm which year model and piston your bike has in order to confirm it is safe to run the larger camshafts. We need to confirm the correct valve to piston clearances are maintained.
The Long Arm gives better visibility and folds farther into center than the short arm. For even longer check out the XL arm This is for one arm only, please order other parts required in parallel or the items listed as assemblies.
As used by Lyndon on Basil Bike and all custom LPR bike builds with Nova Racing Transmission in the LC4. As recommended by Lyndon for Adventure and long distance travel with the Wide Ratio gearbox in the LC4 platform. Includes KTM OEM 17T Front Sprocket, Moto-Master Fusion Steel Rear Sprocket and Moto-Master V6 Chain
10mm x 1.25 threaded mirror mount on horizontal split clamp. Allows mounting on clutch or brake master cylinder for most KTMs, and many Beta, etc. Bolt distance: approximately 33mm center to center
As used by Lyndon Poskitt on all his bikes for adventure and racing. When racing cross-country at high speeds while carrying the additional weight of extra fuel and navigation equipment, you need double the amount of stopping power over a standard MX setup. Enter the Moto-Master Flame Rally disc. Please contact us to check fitment for your application
8mm x 1.25 RAM Ball, utilizing a Socket Head Cap Screw (included, but some applications may need different lengths). Includes a 45mm bolt, 60mm bolt, 70mm bolt, 80mm, 1 inch spacer and 5/8 inch spacer Fits some BMW singles and other plate mounting solutions, please measure your bike to be sure This is for one ball and various bolts as shown in the…
After multiple failures of the stock master cylinder we developed a solution that works and has been tested for over 120,000km without an issue. This steel sleeved master cylinder with bearing mounted lever and piston plunger reduces moments on the piston, wear, friction and premature failure. Not cheap but thats the price of reliability. Most items have a black finish…
LC4 Rally billet outer clutch covers. Design varies by batch, current stock included KTM Racing design, Husqvarna Factory or LPR / Nova / 732 LC4 design.
